Built for powder.
Equipped for
the trail.
Trails and hardpack can leave a mountain sled running hot. Fit a Ski-Doo detachable snowflap to your Arctic Cat Catalyst M to help support cooling on the ride in and out. Reuse factory hardware. No modifications required.
Shipping to the U.S. & Canada. Shipping rates are being finalized.
Mountain sled.
Hardpack challenge.
Terrain Link Products created this adapter to address a familiar frustration: overheating on the trail to and from the riding area.
The challenge
Arctic Cat mountain sleds can run hot on trails and hard-packed snow. Conditions with limited loose snow can make cooling more difficult.
The connection
Our adapter makes a compatible Ski-Doo detachable snowflap an option for your Catalyst M. The flap is intended to help cooling in hardpack and low-snow conditions; the adapter provides the connection.
The flexibility
Use a detachable setup suited to the changing conditions of your ride. The adapter stays mounted using existing hardware, with no modifications required.
Cooling depends on snow conditions and the complete sled setup. Keep monitoring engine temperature and follow your sled’s operating guidance. This adapter is not a guarantee against overheating.
Accessory reference: Ski-Doo’s cooling description for snowflap 860201992 ↗. Snowflap sold separately; this description does not represent temperature testing of our adapter on a Catalyst.
From the workshop.
Out onto the snow.
Trail rides shaped the reason for this adapter. These photos document the product during development and testing, from the trailhead to the riding area.
Photos from the 2025–2026 riding season, AI-retouched for presentation. Development configurations may differ from the current adapter. These photos document use during development; they do not establish a measured cooling improvement. Snowflap sold separately.
One adapter.
A detachable setup.
See the connection with the snowflap attached. Ski-Doo snowflap shown for fitment; sold separately through an authorized Ski-Doo dealer.
Product photos have been AI-retouched for background and lighting cleanup.
Made for
your Catalyst M.
Each adapter is manufactured on a 3D printer using TPU 72D filament.
- Snowmobile fitment
- Arctic Cat Catalyst M-series
2024 onward - Compatible Ski-Doo snowflap
- 860201992 ↗
LinQ Lightweight Snowflap Extension - Material
- TPU 72D filament · 3D printed
- Hardware
- Reuses existing hardware
- Modifications
- None required
- Tool required
- T-27 Torx driver
- Adapter weight
- 124.1 g · unpackaged
Keep it straightforward.
Match your sled.
Confirm you have a 2024-or-newer Arctic Cat Catalyst M-series snowmobile.
Get the matching flap.
Purchase the Ski-Doo LinQ Lightweight Snowflap Extension, part 860201992 ↗, separately through an authorized Ski-Doo dealer.
Have your T-27 ready.
The adapter reuses existing hardware and requires no modifications. Contact us with installation questions.
3D-printed.
Using TPU 72D.
TPU stands for thermoplastic polyurethane. The 72D designation refers to its hardness on the Shore D scale: a firm grade of TPU, rather than the soft, rubber-like TPU many people associate with 3D printing.
Each adapter is built layer by layer on a 3D printer, so visible layer lines are part of its manufactured finish.
Have a fitment question? Ask us ↗Good questions.
Clear answers.
Does this solve every overheating problem?
No. The adapter was developed to help address trail and hardpack cooling concerns by allowing a compatible detachable snowflap to be fitted. Cooling still depends on snow conditions and the sled’s complete setup. No temperature reduction or overheating prevention is guaranteed.
Is the Ski-Doo snowflap included?
No. The $85 USD price is for the adapter only. Buy snowflap 860201992 separately through an authorized Ski-Doo dealer.
What does TPU 72D mean?
TPU is thermoplastic polyurethane, the material in the filament used to print the adapter. 72D describes its Shore D hardness. It is a firm TPU grade; the hardness number alone does not specify the finished adapter’s strength, flexibility or temperature limits.
Will I need to drill or modify my sled?
No modifications are required. The adapter reuses existing hardware, and installation requires a T-27 Torx driver.
Does it fit other Arctic Cat sleds?
The stated fitment is the Catalyst M-series from 2024 onward. Contact us before purchasing for any other model or configuration.
Do you ship to Canada?
U.S. and Canadian shipping are planned. Shipping prices, dispatch times and Canadian import-charge terms will be shown before online ordering opens.
How can I purchase?
Online ordering is not open yet. Contact support@terrainlinkproducts.com with product questions. Checkout, shipping and return details will be available before sales begin.
Purpose-built parts.
For snow and trail.
Questions? support@terrainlinkproducts.com